Recent content by kanekelly94
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Thanks! Really useful guide that!
-
I've bought genuine seals and coppers today maybe make a start on it tomorrow
Change the injector harness and gasket aswell.
Been sat on my side for months.
Did you use the correct £99 tool to remove them?
Was going to attempt the 6mm Allen key or half a water pump plier
-
Nope
6000 miles ago I did
-
Thanks guys
I'll check the oil see if it's increased
Is there anything to look out for when changing these?
-
I think maybe the pump is noiser than what it normally is.
To literally start the car I have to wait for the pump to finish making noise then it starts else it just turns over
-
Land rover discovery 2 td5
-
Help!
My Land rover is struggling to start.
I'm certain Fuel is the issue
I think it could be the fuel pump.
The Car won't start and then when I turn the ignition on and press the pedal 5 times the pump will then initiate and I can hear it and then it will start.
Do you rekon it is a new...
-
Okay so I've had a good look and I've dipped my power steering/ace tank and it is indeed the same colour
When the put my finger in the fluid off the floor it looked clear
So I've got a plastic bag and collected a couple of drips and it's sort of like slightly brown fluid which is the same as...
-
Thanks for the response.
The plastic bag idea could be the one!! :)
My oil was changed about 3000 miles ago, I then had the engine jet washed as I had an oil leak which turned out to be the front cam cover so no more oil leaks.
Its baffled me a little
I shall take some photos when I am...
-
I have a leak from my discovery 2 (SHOCK)
the leak looks like it is coming from the steering box. running down the arm and onto the track rod end then dripping to the floor
it literally looks and has the consistency of baby oil. Clear oil.
I can't figure it out as it does not smell of...
-
I follow a guy on instagram call - Lap_Fabrication
I seen he made these and they look pretty cool.
-
Had a rather annoying weekend!
Bought some new mud flap brackets/mount's as my driver side was rusted away to nothing and was rattling away when driving
So I Purchased some new stainless steel ones from rock shock
Drilled all the old rivets out ready to fit the new ones
The rivets I had in...
-
-
I know the exact noise.
mine has done this once or twice before.
its when I go into 1st gear and start releasing the clutch it will make this little hum noise. it sounds like a pump is kicking in. (Only when my car is cold)
Im not most clued up about the Disco's so please someone correct me...
-
https://www.bilthamber.com/corrosion-protection-and-rust-treatments/dynax-s50
Heard lots of good reviews about this product - you can also buy an extended spray nozzle so you can get right inside the chassis.
I will be using this stuff this year to do mine. you can buy a full kit also with...