JuzGru10's latest activity

Nice one m8 I shall take this advice on board and re think my silicone approach lol I think it was definitely a mixture of the air con pipes and the bracket that landrover put on having said that I don’t know if an owner before me has messed with...

Thanks for all your help m8 I think I’m gunner invest in some new front mud flaps as they seem to be the things that protect the said connectors and put something like silicone round the bottom off the inner arch liner for added protection water...

So at the bottom of the wheel arch I think the landy has air on going to the back am not sure if all landrovers have this but there is 2 air con pipes that run under the near side sill there is a like housing for 3 plugs to sit on it’s rubber...

Massive update so lads I’ve had my m8 round this evening and he said come on let’s check all the wiring we pulled off the front bumper nothing wrong under there the we took out the passenger inner wheel arch cos I’d said about you beautiful lot...

Hi buddy well av replaced the wires and still no joy it’s saying something about the front left corner every part of it is brand new so I have no idea what to try next the only thing is the module under the drivers side footwell a think it’s...

Will do defo I’ve ordered my part from famous four it comes t moz so al fit it t moz after work and put an update on here to let everyone know,,, btw you’ve all been great as I’m new to this sort of stuff I appreciate it massively

How far back would I cut the old clip off plz

Ah ok well we have a shop called famous four near us and they sell genuine LR parts so al just go there

I’m gunner buy the repair kit and change the actual plug to the sensor it’s always said on the computer it’s been the fault so it can’t hurt can it do you know of anywhere that does a genuine one please bro

What can I do then bud should I replace the wiring to the front left sensor

Onestly m8 I press the button to raise and it moves for about a millisecond and stops boom fault code on,,, it’s throws different codes like the first time it was left ride height sensor changed that then it was front valve block changed that...

The wiring all looks good from what a can see m8 would I need to take out the dashboard to chase them back to unit on the drivers side

Front left 460mm, front right 470mm, rear left 465mm, rear right 470mm,,,, we cleared all the codes but I’ve not had them cleared since I changed the centre valve block we did try to calibrate it but it kept saying couldn’t do it because couldn’t...

Do you know how I can sort this plz m8 it’s doing my head in lol

Hi fellas today I changed the centre valve block been on a test drive and it’s been fine doesn’t drop to the bump stops the only thing is soon as I try and select access height or off road it’s says suspension fault still of this helps a don’t...

Hi m8 am gunner have a look at the wiring in the morning is it under the front passenger side sill

when I measured the ride heights in normal height mode i had 4 different readings all within the 400mm range from the centre of the wheel to the underside of the arch but in the morning I will measure them and send you message where do you want...

This is all the information the code reader told us hope this helps

Hi m8 just a quick 1 but if I bent the housing the rear sensor sits in could this be my problem as the little bolts holding the sensor in were rotten to the core i had to force the old one out bending the metal box that it sits in i did bend it...

Am gunner get the codes later tonight thank you so much am just at at point where I don’t wanna spend loads more money and it be a loose wire or bad connection lol

Also his scanner is a snap-on

On my mates machine it came up with C bus couldn’t send or receive data or something m8 I will later on get the code it says,,, all the other 3 sensors click but the front left doesn’t seem to and it’s brand new genuine part too

Hi guys I’ve all of a sudden been getting a yellow warning light on my lr3 2006 suspension fault so the motor lifts from normal height to off road for about 2 inches and then says suspension fault normal height only,,,,, when I take it out it’s...