Recent content by Jrichards6

Is there a lh and a rh or are they both the same

Sorry should have clarified engine mounts

Need to change a mount on my disco 2 td5 as the os has gone. Gonna get them both done whilst im at it. Ive heard some aftermarket ones are no good and people have ended up swapping back to the originals. Can anyone recommend on the best ones and where to get them from? Cheers

Ace has been removed. Im thinking ball joints or swivel pin preload need to get ot jacked up this am

Apologies ye d2 td5

Recently had a knock on the front end going over bumps. Changed the following due to wear ... Anti roll bar bushes front and rear Front and rear anti roll bar links Terafirma heacy duty steering bars and damper. None of these made any difference. Ive just this week changed all the shocks to...

Gonna start with cleaning the tracks and try and wond by hand and see how I get on

Turned out rear motor was dead. Looks as if the rear mechanism isn't for working. Tried the front motor in the rear without attaching to the frame and it spins fine. As soon as I bolt it in place you can hear it attempting but nothing moves. So will have to strip the mechanism now...

I've tried from both the front and the rear switches no different. Gonna hazard a guess at the ecu. But will try this first

Afternoon I'm in the middle of doing seals on both front and rear sunroof in disco 2. Presumed rear motor was dead and planned on replacing. Plugged the front motor in the rear and this doesn't work. But when either motors are in the front they work. Are they on 2 seperate fuses, ive...

I fancied something like this https://www.pioneer-car.eu/uk/products/sph-evo64dab-uni But the more I read the less confident I feel about fitting it. Only ever messed with plug and play. Maybe a bit more research is in need.......

Afternoon all, apologies if this has been covered. Iv recently acquired a discovery 2... with the hk audio system and the Becker navigation system. Ideally I would have kept this and had an aux lead but have been informed this system doesn't have the capability. Has anyone got around this? Or...