Jono101's latest activity

Managed to solve the issue, my question was regarding installation of a new double din unit which has an option for a reverse camera, which would go crazy thinking I’m reversing whenever the car was in gear. After disconnecting the above wire it...

Is anyone able to confirm that the Orange/Yellow Wire is linked to the reverse? Cheers

Take the top off the steering column (three screws from below) then take out the 6 screws as shown and when it's out you'll see how to take off the painted bits. I sprayed mine satin black as they were a bit scratched and the result was great.

Try

That’s brilliant thank you, do you have a link to that manual???

If I recall correctly, first remove the black piece around the clocks. Then eventually the gold plastic trims are clicked in.

I can't remember exactly, but you do need to remove the 2 screws under the hood of the Ipack first. Then I think the hood comes up, on clips if I remember correctly. I think there are hidden screws once the hood is out the way.

Can’t seem to budge the black trim around the clocks, I have removed these 2 screws but it feels like it is held in place from somewhere around the steering column?

Afternoon all, Anyone know how to remove these 2 pieces of trim? I can only find stuff online about the mk1… Cheers for the help.

Looks like the cable conversion kit isn’t suitable for your car. Needs to be wired in right. I don’t have a diagram for the standard wires or your unit so can’t advise what to cut chop or change. I would just get another harness adaptor. If it...

I was at my wealthiest at 25. Had my own flat, no wife, no kids, loaded. Its the next 30 years where you struggle! Then there's a brief period of wealth, before, presumably, you struggle again.

Cheers for all the replies! Seems like it would be a lot of hassle… the reason I was asking is they’re similar to the new defender steel wheels, which I think look pretty cool but as a 25yo with a limited budget, it’s a little bit out of my price...

Hi all, Got a bit of a project going with my FL1, I have found some Dacia Duster steel wheels that I like. The bolt pattern matches and I can get some spigot rings that will help with the fitment. I am wondering whether they will fit as they...

Hi all, Recently fitted a double din stereo unit into my 2004 FL1, absolutely fine when at idle but goes crazy when I start driving, thinks I’m reversing… The factory loom allowed for decent ‘plug and play’ compatibility, but this issue is...