Recent content by =jon=

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. J

    For Sale 1.4 LT230 / 1.2 Q LT230 Gear Set / 36 Spline Steering Wheel Boss

    Noise is pretty subjective.... :-) I thought it was noisy, but I have a reasonably refined v8 County... Bit then I'm fussy and can hear the totally rebuilt 1.4 (with brand new gears) that replaced it whining.... If it was a diesel then you prob wouldnt notice it so much.... It wasnt knackered...
  2. J

    For Sale 1.4 LT230 / 1.2 Q LT230 Gear Set / 36 Spline Steering Wheel Boss

    You'd need to drop the transfer box, split the case, swap the gears out and retension the bearings and put it back together... It's not really rocket science but a bit more than a 10 minute job... :)
  3. J

    For Sale Donaldson Air Filter & Box (like Wolf)

    Hi, I bought a Donaldson filter and housing for my v8, but it's slightly too large to fit in the space due to the other gubbins around it... My EDIS coils are on the back of the head on my v8, and the MS / EDIS controller are on the firewall - with a more standard setup it would probably fit...
  4. J

    For Sale 1.4 LT230 / 1.2 Q LT230 Gear Set / 36 Spline Steering Wheel Boss

    LT230, 1.4 ratio. 13D serial number. Fitted with a new ashcroft input gear, input seal & input bearings and oil feed plate. It whines a bit but all works OK - £120 ono Ashcroft 1.2 'Quiet' gearset for the LT230. Came out of my transfer box when I swapped back to 1.4 ratios. Ran very quietly...
  5. J

    Unused Donaldson / Wolf Air Filter

    Hi, I bought a Donaldson filter and housing for my v8, but it's slightly too large to fit in the space due to the other gubbins around it... My EDIS coils are on the back of the head on my v8, and the MS / EDIS controller are on the firewall - with a more standard setup it would probably fit...
  6. J

    Defender 90 HT Safety Devices Roll Cage

    If you definitely wanted it I'm sure we could work something out - it's way too big to courier but we could meet half way or similar...
  7. J

    Defender 1.4 ratio transfer box

    I think most 110's came with a 1.4 as standard... Let me know again when it's removed - if I've not sorted something in the mean time I'll be interested :)
  8. J

    Defender 1.4 ratio transfer box

    Hi A 1.4? How much would you want for it? I worked out the ratios properly last night and I think a 1.6 would be slightly too low geared for what I want... Cheers Jon
  9. J

    Defender 1.4 ratio transfer box

    A 1.667 from a NAD 110 may be an option as well...
  10. J

    Defender 90 HT Safety Devices Roll Cage

    Bump, still for sale...
  11. J

    Defender 1.4 ratio transfer box

    Hi, I'm after a good condition 1.4 transfer box for a defender, if it's close to Oxford / Stroud that would be even better... Anyone got one kicking about they don't want anymore? :) Cheers Jon
  12. J

    Defender Dash Top

    Hi, I'm after a decent condition defender dash top - the bit that runs across the top of the dash next to the windscreen with the demister vents, ash tray etc Anyone got one spare? Thanks Jon
  13. J

    110 rear seats / frames..

    All sorted thanks to Steve :)
Back
Top