Recent content by Jon Richardson

I have replaced the fuel pick up. I did need to drill out the rivits for the boot floor as there is no access panel, but it was relatively straightforward. When I took it out there was a large flake of rust partially blocking it. I guess it was from the fuel pipe just before the join as the tank...

I'll check that. I did check the intercooler hoses and they're all ok.

I 'll give it a go. Thanks

Thanks Steve. I put the fuel filter one about two years ago, but it's probably only done 1000 miles. It's worth changing it. I have ordered a new sender for the discovery fuel tank as there was definitely some corrosion on the pipes. I did take it out again last week and it didn't miss at all...

Hello All I have a 1974 Range Rover which is running a 300TDI and Manual Box from a 1995 Discovery. (Was fitted with a Perkins when I bought it). I also run the Discovery fuel tank. Recently it started to missfire when I was on the motorway at ~70mph. I backed off to around 55 and left the...

Perfect - thanks Brian

Hi Does anyone know the size of the power steering box bolts (4) for a 1995 Discovery 1. I have managed to lose mine :-S (Putting the box from the Discovery onto a RR Classic - I have the classic bolts but the threads are different.) Thanks Jon

Thanks Alan

I am in the process of restoring a 1974 Range Rover. The back of the servo is completely rusted through. It seems difficult to get hold of the imperial servos, but I have one from a metric braked car that looks pretty much identical. (apart from the horizontal vs vertical mounting for the master...

I am in the process of repairing an old range rover classic. I have been recovering the seats, but could do with painting the backs of the rear seats and subframes for the front ones. Does anyone know the code for the Beige colour is? (It is a 1974 car - Davos white, but the backs of the seats...

Hi Everyone, I have just joined LandyZone. I have bought an old Range Rover Classic that is in a bit of a state and I am in the process of trying to get it back on the road. It needs sills, door pillars, footwells, inner wings...etc. Currently fitted with a Perkins 4203 but will put a 300TDi in...