jon.evesham's latest activity
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
jon.evesham replied to the thread Rear Folding Seat Position (Photos Included).No, I need to make or find an attachment, the buckle is on the seat already though. These are as forward as I can get while still being plenty of room for an adult: mostly they are for the kids though -
jon.evesham replied to the thread Rear Folding Seat Position (Photos Included).Hi how did you get on? I've fitted similar to mine and I'm trying to fit the seatbelt. I made my own body brackets of a fashion... annoyingly they ended up but quite in line, but fine!
-
-
Replace the stock windscreen washer with these: LINK Best mod I have done on mine hands down!
-
Off the top of my head I cannot tell you the colours, but you need a 12+ve from the fuse box to the switch which comes on with the ignition, then run a wire from the other contact on the switch to the light bulb and you also need to run an earth...
-
jon.evesham replied to the thread 1985 90: switched 12v hardly working.Yeah I'm looking at that, to switch the fag lighter too (which has never worked)
-
jon.evesham reacted to Phill's post in the thread Newbie Question - Is this rust bad under a TD5 90? with
Like.
You're looking in the wrong places. -
jon.evesham reacted to ForceyBoy's post in the thread Newbie Question - Is this rust bad under a TD5 90? with Like.
Thanks for the quick feedback! So would you power wash it first to get the muck off, then after its dried go at it with a wire wheel? I've seen that some people prime and paint, is that classed as undersealing it or is there a specific way to...
-
Morning! I'm fitting a new stereo and the switched 12v only comes up with o.5v max, not enough for the stereo to recognise... Other 12v stuff is working OK, is there any specific area to look at? Cheers!
-
