Recent content by John_l_k

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. J

    Rear door trim clips. 1998 FL1

    Back to nearly concourse, and with £3 still safely in my pocket. That's what I call a good day 😎
  2. J

    Rear door trim clips. 1998 FL1

    South Coast UK, near Brighton. And really good to know, thanks. At the moment it's just these little bits and pieces I need, luckily.
  3. J

    Rear door trim clips. 1998 FL1

    Excellent, thank you. I do have a list of bits to source so that will be of great help.
  4. J

    Rear door trim clips. 1998 FL1

    Great, thanks, no need for a special order then. I'll see what I've got at home. I love it when it's a simple fix 😁
  5. J

    Rear door trim clips. 1998 FL1

    Hi again, Just wondering if anyone knows a part number for the clips/screws that hold this rear door trim down to the floor? And are the 6 clips the same as the middle 2 holes have different coloured (black, not yellow) mating parts? Thanks in advance.
  6. J

    Freelander 1 Locking wheel nut

    A 2nd hand set of 5 wheel nuts for an ally wheeled FL1 on ebay = almost £20 Similar price for the correct key, and with no struggling to get the old nuts off. Also a slight deterrent, not just for the wheels but also for my matching, almost new tyres. Thanks for the link. I've now ordered.
  7. J

    Freelander 1 Locking wheel nut

    Sorry to revive an old thread, but this came up in a search since I just sheared off the 2 lugs in my security bolt key which seem to be the same size as the OP. As I still have the key, I can see the markings indicating the code number, but they are misaligned... I've just called my...
  8. J

    Feels like handbrake is on! FL1 1998 1.8

    Excellent, so I possibly have a healthy VCU, as well as free wheeling wheels. Mileage is only 96k and AFAIK the original VCU, so not bad going if 70k is the expected service interval.
  9. J

    Feels like handbrake is on! FL1 1998 1.8

    After a crude OWUT using an extended breaker bar and a bucket of bricks, I was pleased to note it took around 25 seconds to rotate from 1.30 to 3. The extended pole was accurate at 1.2m but the bucket of bricks weighed a little more than 6kg, and it all felt a bit ramshackle, especially as it...
  10. J

    Feels like handbrake is on! FL1 1998 1.8

    All back together, wheels spinning freely, foot brakes and handbrake work, and everything frees off when released. All good, job done thank you. I can only put it down to the order I did it last time that messed it up, or maybe not enough of a clean up inside the drum meaning things didn't...
  11. J

    Feels like handbrake is on! FL1 1998 1.8

    Best I could do regarding pictures of that spring. It looks well to my eye. Going to try and reassemble now. Wish me luck. One thought I have had in all of this, at least the VCU concern has been forgotten 😊 Although I will do the test once this issue is over.
  12. J

    Feels like handbrake is on! FL1 1998 1.8

    I took the offside rear wheel and hub off to see where to poke the screwdriver, which has no done the trick. Nearside drum is off. So both sides have been released again, and the drums slip on and off quite easily. I'm not going to mess around with taking the shoes out and going for a deep...
  13. J

    Feels like handbrake is on! FL1 1998 1.8

    Please be tolerant of my ignorance and substitute the word hub for the word drum as you see fit 😳
  14. J

    Feels like handbrake is on! FL1 1998 1.8

    Thanks for all your suggestions and sorry for the delay yesterday. I've got another vehicle issue, this time with my van dumping out power steering fluid. Anyway. I can report, all tyres are the same, make, model size etc. In trying to freewheel about 6 feet on my driveway, in a straight...
Back
Top