Recent content by Joems

Didnt check with nanaocom put had put new waste gate actuator along with a new pipe on it with about 20 or so threads on it and even blanked the egr to see if that had any effect. Also changed the potentiometer out with another td5 to no result. AA and landy mechanic both recon its definitely...

what do you recon the next step is to do then. had a donor ecu from a d2 td5 with defender map on and still has the same issue. starting the think its ore mechanical now. do the cranks tend to float on td5s? starting to think it could be excessive movement in the flywheel which triggers the...

new fpr fitted and still problem persists!!

its still at the garage. they are struggling to sort it out aswell. im now wondering if maybe the bearings on the crank have gone leading to excessive play in the shaft leading to the crank sensor shutting the ecu off?? lost for ideas on this head scratcher. i do get the error code of high speed...

no their wasnt one before. however i replaced the flywheel with a lof one so im unsure if im now ment to add a spacer or not? nicked the ckp off my dads one with a spacer and still no joy.

Hi mate did you ever fix this issue. I have the same problem on my defender

I wasn’t using the nanocom correctly hence the stupid readings. I have a stock disco ecu with a stock defender map on it as I was told by the garage that my ecu could be causing a high speed crank code. However that is not the case as I still have that code coming up on the nanocom. Just...

Sorry I was being a mug and clicked the wrong button on the nanocom!

Sorry for the late reply, still playing up! Scratching my head. Have you had any luck?

Hi all on my 2002 Landrover td5 90 Having a really rough time trying to resolve this issue even giving in and sending it into a garage to resolve which they haven’t done although making me buy new (reconditioned) injectors I’ve replaced the crank sensor numerous times, with oem and genuine ones...

hello all, whilst driving my defender 90 td5 along the motorway trying to reach 70mph, my engine would cut out and the eml would light up. i have had this problem for ages and have spent a hefty amount of money trying to solve it however i still cant seem the crack down on the issue Things i...

Do you still do these?

Yeh comes up when I high rev. Also sometimes appears when I start it up and the eml comes on.

No luck unfortunately. Bought an overlay and still didn’t work. Also changed the crank sensor with a genuine one that was working in another landy

Hi all really stuck for ideas now, keep getting error 15,2 high speed crank on the nanocom whilst changing Crank sensor Wiring loom Starter motor Cleaned earth points Changed the injector loom recently Hopefully some of yous will be able to give me some inspiration on what to do next