Recent content by jimbojambo

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. J

    Tips for maximising MPG

    I've got a new job which means my beloved TD5 90 CSW does 90 miles a day now. I was initially banking on 30MPG but, running the tank as low as I dare then filling right up, and reseting the mileometer etc, is getting me between 34 and 36MPG consistently! I have the Ashcroft Disco gearing in my...
  2. J

    Noises from the rear diff on a TD5

    I have disconnected the prop shaft with the intention of making the play easier to diagnose.The only problem is I don't know what to feel for! I think the play is made up of 2 halves - the first half feels free - then it engages something - and the second half feels like something else is...
  3. J

    Noises from the rear diff on a TD5

    Thanks Gents Right - I've got a fair amount of rotational play but none lengthways as per the video. Is this normal or is this excessive? Feels a bit much (to my untrained eye!) IMG_0306.MOV - YouTube
  4. J

    Noises from the rear diff on a TD5

    Thanks Shifty What's the easiest way to test this? Take off the prop shaft and see if there's any play in the flange and/or whether the nut is done up properly?
  5. J

    Noises from the rear diff on a TD5

    Hi there I have a strange noise coming from my rear diff. If I have been driving forwards and then stop to reverse, as I lift the clutch in reverse and apply torque in the opposite direction through the diff, it makes one loud knock. I can then reverse quite happily without anymore noises...
  6. J

    Reverse Light Wiring Colour?

    Ok, I will try that - thanks. I have only had the defender for a week so will work out how to get the cubby box off and access. Judging by everything else I've seen, I'm sure it's simple enough and well thought out!
  7. J

    Reverse Light Wiring Colour?

    Hello all, Does anyone know what colour the wire for the reverse light is, when under the driver's seat in a 2004 TD5 defender? Just halfway through installing reversing sensors and before I start snipping wires I thought here would be a good place to start! Thanks in advance
Back
Top