Recent content by James.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. J

    Injector Compensation Rates ...

    Brought some referb injectors to fix my poor idle ect as thats what the indi confirmed with diagnostics but once fitted still poor, they are saying that the compensation is about -2.0 the injectors are faulty. The indi garage said injectors should be about +/-0.5 max and the company I brought...
  2. J

    new bling (dph silicon hoses)

    Not too full its just discoloured.. I did clean it out but still looks mercy from last owner (no idea what they did to it lol, but I first thought it was a HG gone :-/ ) and i got the cover off as i was replacing the long vacuum hose to the turbo and it goes in by the injectors. Will try and...
  3. J

    Strange Grinding noise....

    I had this and I changed the rear exhaust box and it stopped and now its back im thinking its the center box now too .... its where it gets soo rusty. ... well thats what mine is but might not be on yours.
  4. J

    td4 misfire and smoke at 2000 rpm

    I had a missfire at about 3k when i was reving from idle (when plugged into diagnostics) and i changed the long vacuum pipe (vacuum to turbo actuator) and now it is gone.
  5. J

    should this happen ?

    and diesel smelling white smoke too ? :P
  6. J

    Lumpy Idle and smoke on starting

    had injector 3 changed for a recon one and now alot better but still a little lumpy and smoky on first start, but doesnt do it again until next cold start. so im happier
  7. J

    new bling (dph silicon hoses)

    Here they are .... just want to change the left one ... the one which gets a hole from the bolt. any ideas how to get into that bloody jubilee clip ?
  8. J

    Lumpy Idle and smoke on starting

    Went to LR Indi Yesterday and we plugged her in and No3 is at 2.6 and No4 is 2.7 .. so hes going to test them and probably be replacing No3 as thats the problem one and then causing No4 to be high apparently.
  9. J

    Lumpy Idle and smoke on starting

    Rev needle moves about 10mm up and down when starting with white smoke, once started runs ok until you come to lights ect and idle is erratic again but not as bad .. maybe 5mm. Got her booking into a garage on monday so they can remove and test injectors, but im not so sure... could it be fuel...
  10. J

    new bling (dph silicon hoses)

    I fitted the green ones... well all but the one on the left! just a pain in the arse to get to. Looks good though
  11. J

    power losing power

    That's the filter for your turbo actuator, only has one pipe as other end is for fresh air.
  12. J

    Fitting a Double Dinn GPS/DVD into dash

    Mine is the indash 6CD, and i do need the ISO lead ... but the lead marky said about has a loose pink wire and i have no idea which one to plug it into as atm i have no audio (but i have power)
  13. J

    Fitting a Double Dinn GPS/DVD into dash

    My PC2-80-4 lead arrived today but which pin on the ISO block do I plug the Pink 'loose' wire too ?? as atm there is no audio (HK system)
  14. J

    Missing bolts on sump, what are they?

    okay but what's the point of putting a bolt in a empty bolt hole ... if there is meant to be a bracket then fair enough but put the bracket on too. If you look on the Gearbox and other main parts of the engine there are blank holes but this is because that component might be mounted slightly...
  15. J

    Light guards/sidesteps

    How to fit front guards: http://www.landyzone.co.uk/lz/f9/how-fit-light-guards-162657.html
Back
Top