Recent content by jacks906
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
what diffs are you putting in 10 or 24 spline if is had the rear axle changed for a disco axle with disc's to get rid of the salis
are they standard diffs your putting in or are you doing the repairs your self
dave
-
well changed clutch in mine for a 130 HD valeo plus valeo pressure plate have box back on all went fine but have only got pressure on the peddle at about the last inch of its stroke :D its as tho systems not bleed but have done it 3 times so leaving it for tonight to see if any bubbles that are...
-
only problem i had with safari was laning the top kept getting hung up on branches and had to go round most of the time without the top on
now have a mushroom top one and all was good till closer inspection while i was doing chassis change and the flexi tube has loadsa mini bullet holes in so...
-
a defender pick up is a truck the oly truck land rover do :D :p :D
haha
well come and any questions you have just ask someone will no the answer
another good info hole is
The Green Oval - Downloads | Land Rover Data
dave an his truck
:p :p
-
take as much of the dash as you can appart and route all wires correctly will make life easier in the long run, and aint really no biggy
dave
-
good luck hope you have a great time
dave
-
blow down them an check there not blocked the front 3 should be just behind your engine at the back blow down if the air hisses back out the tube there fine if not get a newy poped on
dave
-
heres me chasing a broken wire an getting rid of some old ones :D
dave
-
replace no matter wat a mate delayed replacing the "P" gasket
£500 later and a day with me fixing it (free) he wishes he replaced the 50p gasket
CHANGE CHANGE CHANGE
dave :-)
-
while you got it apart fit a set of wipac crystal clear head light units and a set of good standard spec bulbs and it will improve night driving a million times over
dave
-
thats the one i was told may have miss heard on the pressing the pedal part :)
dave
-
another thing on that i heard some where on TD5 you switch it on or off or something and press go faster pedel 15 times turn key again or something and it self primes
dave
-
only live in northwich 20 mins away was going come pick them up but thought bugger it lol
problem i have is the filling and skimming parts of it didnt last long till it rusted
dave
-
if i were you i'd swap it for a new sali axle with discs on, more because of the weight your going to carry.
i'd also stick with the wolf rims they will take the weight with ease, you could change the studs for mill spec this would give you a couple of threads the right side of the nut (the...
-
sorry in post 16 i was on about the gauge to start with not the intercooler
a mate changed his in his def 90 for a supra one worked very well
i found one in a scrap yard that was on a volvo but he car wasnt being scrapped it was the right size just needed turning so that both inlet and...