Recent content by intlclarke

HI Raywin. I think my fuel pump is dying. Last checked it was barley 4psi. I think it should be 5-6psi until it gets regulated. ive ordered a new one. ill keep you posted.

Hi Raywin, I finally received all the necessary bits to run the test (we are in the midst of a full lockdown in Ontario, Canada making buying more difficult ). I ran the Defender up a slight incline at >3000 rpm and read the pressure gauge. It typically ran to about 15psi, which I believe is...

OK thanks, I have read that if you get this reading it means your ECU has died but that doesn't make much sense given the cars still running. Maybe Im missing something (again).

Hi Raywin. Quick update. i was able to borrow a friends Hawkeye. Only 1 error: CD ROM Checksum Error. Any ideas what this and could it be the cause of my issues?

Thank you Raywin. I'll give all your suggestions a try and let you know.

Hi Raywin, One more piece of info is that this all started because the engine lacks power and grunt and barley make it to 100 km/hr. I thought my problem may be the turbo not playing its roll.

Hi Raywin, Yes you are right re: cylinder head. I installed a new Turners AMC Cylinder head (during the "over run" drama) and new injectors with LR seals, pistons rings and bushings. Also installed a new turbo cartridge. I reinstalled the turbo/actuator with exactly the same number of...

Hi Raywin, Also..... would a bad MAP sensor cause this issue?

Hi Raywin and thank you for your response. Yes the vehicle was stationary, but I did have my daughter rev the engine and the actuator did not move. I didnt do a load test on a hill. One other bit of info is that I recently had a big issue whereby the injectors leaked so badly (over time) that...

I wonder if anyone has this problem.... My turbo wastegate does not operate when the engines revs (and so my turbo does not operate properly), but when I disconnect the 4mm tube to the actuator and inject 15 psi air, the actuator moves as it should ( correct me if I'm mistaken). When is...

thank you for your help. guess i missed the intro section.

Hi. I own a 2001 Defender TD5. Which way should I turn to loosen the fan nut?