Recent content by iluvspraying
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Defo needs another coat mate i reckon ..key it down with red scotchbrite pad and stand a llittle further back when spraying....really good though ...black and red go well
-
Wot colour the body going pal????
Ya use Shultz gun on roof?
-
-
Can use through spray gun 2 for smoother finish an get 30% more coverage
..an i do strip everything off car always....saves masking up....plastics should be plastic primed first
-
-
U should have used the tintable on m8
-
....Schultz gun.......... I keyed the side 24 hours after painting and didn't mark it ...it so tough....
This is not a stone chip.....
I found just below 4 bar was good as any lower splashed unevenly ....
1 medium to light coat .... I start from bottom to top on every panel......leave just...
-
I been sampling this for a while m8...I found 2 coats enough... 3 the most.....U can also use a 1.8 nozzle gravity spread,gun for a much smoother texture... I did the roof through spray gun....using this you get a lot more coverage....may be double......
For the real texture use the Schultz
-
Not after work by the way or promoting business.....just had state that shut the farmer boys up lol
-
Wasnt sure meself pal ...Had my doubts 2 when asked do it but it **** hot....protects, rust proof etc...can have smooth 2
-
Stone chip....u so funny ....it's a little different than u tractor boys used 2....jcb yellow suit ya
-
Everyone wants to be Ed China
-
Lol...can't flat an buff this 1 haha
-
Nice job want me come an flat it down and paint for ya now do a proper job...
-
Wow ...lol u Use a roller on that?