I ran 225.75/16 Kumho kl71 tyres, fitted brand new to standard alloys, without spacers.KL71's are insanely aggressive, starting life with like 22mm tread blocks, these were admittedly precariously clost to the spring seats, but they do fit.
First maybe clean the spade end on the starter, if that does not improve it which it may, but either way i would personally remove the starter and change the contacts and plunger.
Its not an hard job maybe 45 minutes work cost of parts are low...
Hello fellow landyzoners!
Yesterday, hot summer afternoon, after some driving lessons including several engine stalls and restarts of my old fl1 td4, the starter refused to crank anymore. After towing home, in the chill of the next morning, it...
Presumably if you turn the key to "crank" and the radio goes off, then the ignition switch is working.
You should have an alarm/immobiliser LED on the dash - it will blink when you are away from the car and it is alarmed. It turns off when you...
Hello, a related question, I removed the vcu to change the bearings but forgot to mark it for realigning with the propshaft. Would it cause vibrations? Can it be rebalanced somehow? Thanks
I have a Diesel Freelander 1 which I use on our smallholding. I had the injector tips cleaned and after refitting there was a loss of power and lots of white smoke on any strain on the engine accompanied by pinking. I think I sussed it insomuch...
V6 has a different VCU to TD4 and 1.8 petrol. No damper fitted.
3 door and 5 door are same length wheelbase.
If yours is missing do a search and check IRD and diff are not damaged before fitting then do the one wheel Up test afterwards to...
Hello, i'm considering fitting a new propshaft to my 2004 fl1 with 5doors. I found one (used) complete propshaft with vcu and bearings, but it is advertised as one coming from a soft-top fl1. In the pictures it looks similar to mine. Are there...