Recent content by hi court

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. H

    P38A 1997 2.5 cranks dont start

    Evening, ive had a bit of a productive day, ive checked earths, load tested wiring, cannot get to the bottom of the issue. I even checked pin grip of the pin on becm that earths relay 19. No issues found. So I removed the pin that earths relay 19 from the becm multiplug. If I give this wire an...
  2. H

    P38A 1997 2.5 cranks dont start

    Good shout with the earths, I will double check that. I plan on checking the becm earths also at the weekend, I have rave so am going to research where they all are. I'm going to load test the wiring with a 21w bulb as I'm curious about the white wire that goes from becm to relay 19. I'm...
  3. H

    P38A 1997 2.5 cranks dont start

    Datatek, thanks for your reply, could it be the engine ecu has lost its code from from the BECM which a syncmate would fix? I'm sure its a fusebox issue too, it can't be a coincidence originally when I hit the fusebox it would start. I did consider as I had the battery disconnected for a while...
  4. H

    P38A 1997 2.5 cranks dont start

    Evening all, I have a 1997 2.5 p38 with a starting issue, I apologise in advance for the story that follows.... I've had the car 15 years, almost no real issues in the time. I have used it as a daily doing 15k a year but over the last few years it only comes out the garage in dry weather...
Back
Top