Henry.adams's latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  • Henry.adams
    2 questions besides the position of reverse gear how can you tell the difference between a lt77 and r380? Is there any difference in the transfer box on the lt77 and r380 Many thanks
  • Henry.adams
    Henry.adams replied to the thread Td5 hydro lock.
    No it definitely was oil so I had about 22l of fluid in the sump lol obviously I got a lot of diesel in there and that must have been pushing it out the turbo seals or something into the exhaust. After changing the oil to the correct amounts...
  • Henry.adams
    Henry.adams replied to the thread NNN throttle settings.
    It’s definitely still not running 100% but the FPR seems to have cured the stuttering I guess this engine lives another day
  • Henry.adams
    Henry.adams replied to the thread NNN throttle settings.
    lots of dirt inside the regulator
    • IMG_1527.jpeg
  • Henry.adams
    Henry.adams replied to the thread NNN throttle settings.
    Ok I will start with that. See if that helps
  • Henry.adams
    Henry.adams replied to the thread NNN throttle settings.
    I’ve bought one of them ****ty rebuild kits going to to it this weekend. Would you recommend I just replacing the whole unit ?
  • Henry.adams
    Henry.adams replied to the thread NNN throttle settings.
    The water damage was over year ago it’s been sitting while trayback it so I doubt it dried out all of a sudden. The complete story of this engine is very long and I don’t think I can ever explain everything but it will try sorry for the long...
  • Henry.adams
    Henry.adams replied to the thread NNN throttle settings.
    It’s really weird the engine would never start no matter what I did until I plugged in the NNN and it started on one turn of the key. Went back to the original MSB and it ran but only on 4 cylinders. Back to the NNN and it ran back on 5. Then...
  • Henry.adams
    Henry.adams replied to the thread NNN throttle settings.
  • Henry.adams
    Henry.adams replied to the thread Diff identification.
    Haha there is always one ……… Ashcroft was my first thought but looking at them non of them look the same
  • Henry.adams
    Can anyone identify this diff been told it’s a 4pin 24 spline ATB/LSD can anyone verify that?
    • IMG_1500.jpeg
    • IMG_1501.jpeg
  • Henry.adams
    Henry.adams replied to the thread NNN throttle settings.
    Into a D2 managed to get it revving but engine is stuttering on rev I’ve got a leak on the pressure regulator could that be drawing air in you think ?
  • Henry.adams
    Henry.adams posted the thread NNN throttle settings in TD5.
    I’ve put a NNN ecu to my 10p pre facelift as the original ecu got water damage I know I have to get it mapped eventually but for now I just want to get it to rev what settings do I need to change to get the engine to rev??
Back
Top