Yes I have a note of the number of shims used and the position of the hinges. I will probably have to do some more tweaking but the idea is to reduce the amount of fitting and removal which could ultimately damage the finished paintwork.
Got the bonnet and deck panel stripped and the repairs and initial filling/priming done so I could get everything (bar the tailgate) in place and shimmed up ready for final prep and colour -
Reasonably happy with all the gaps and alignment the...
No Problem, one other bit of advice from my experience with the non-isocyanite paint you are going to use.
I can understand why they are used if you dont have an air fed mask and take lots of care isocyanites are nasty particularly if you have...
Hi, Tried writing a PM for you but it was more than 420 characters (I waffle on far too much!) so thought I might as well reply here.
This is my process and I know there will be other opinions and alternatives.'
The problem with alloys like...