HACKCHILD's latest activity

This one’s an AJ 4.4 V8 so I’m not entirely sure if that’s as common as on the rover. I’m yet to completely cure it but getting engine mounts done soon to see if that helps. I’d imagine they are rather shot anyway.

Thanks for the info. I must admit I was aware that resetting adaptations does more harm than good but I figured it could have had some bad data in there from the throttle body being gummed. What’s the cause of short term trims being on the...

I can’t help it I’m afraid, software engineer 😆 I guess I’ll get the engine and transmission mounts done

Your last line would have been my first in response. Not everything has to be diagnosed with a pooter!!!

Haha yeah I was sort of hoping it wouldn’t be this! Bit of a pain for a driveway mechanic and will probably have to go to a shop 🥲 Seems to be worse on the cold start but I guess the engine is thrashing about a bit more when cold.

Hi everyone, Apologies for the duplicate thread, if possible can admins delete my old one and keep this one it seems I posted it in a less than ideal place :) I’m chasing down a slightly lumpy/rough idle on my 2006 Discovery 3 4.4. It doesn’t...

Hi everyone, First post so I hope I’m following order and doing it in the correct bit. I’m chasing down a slightly lumpy/rough idle on my 2006 Discovery 3 4.4. It doesn’t sound like a stumble or miss but the shake/vibration is felt through the...

Hi everyone, First post so I hope I’m following order and doing it in the correct bit. I’m chasing down a slightly lumpy/rough idle on my 2006 Discovery 3 4.4. It doesn’t sound like a stumble or miss but the shake/vibration is felt through...

@PRO Do you roughly know the service function names you ran to smooth the idle? I have a bit of a rough idle but I can’t find idle calibration or fuel trim calibration anywhere. I can only find the idle test. Cheers for the iso btw, the only...