GrumpyGel's latest activity

Found somewhere, its called Cirencester Motor Company, Love Lane, Cirencester. Did my cambelt/auxiliary belt and water pump. also had my Haldex oil and filter changed. and Diesel Fuel Filter. Getting my Auto box and diff box oil changed next...

Presumably you know the light doesn't come on because of the startup tests when all the lights are lit. Has someone butchered the LED to get it through a MOT? Will it fail a MOT if it does not illuminate on the self test? In doing that took...

After you have polished up the lenses, spray them with a UV protector or they'll cloud up again quickly. Either that or the car parts shops here sell snake oil.

Took it for MOT. Failed on headlight image on both sides. I must admit, the lights are cloudy, and there is condensation in them.

I'm sure there are ICEs that make the Freelander feel slow. And there will be ICEs and EVs that make the Freelander seem fast.

Is this a common thing on F2?

IIRC there are 2 parts to immobilisation 1 is cranking the other is fuel injection. The car's immobiliser (or IIRC the CCU dependent of age) handshakes with the engine ECU and they determine if immobilisation should occur. The immobiliser...

I think there’s a bit of confusion about this post, with regards to the heater knobs. I don’t have any problems with surrounds - the red and blue, direction or fan speed are all lit up as they should be.What I was asking initially (although I...

Jesus christ 0.2 seconds and 2mph difference. That really is a massive difference. You'll be wanting to weigh the driver next.

Here you go... https://www.landyzone.co.uk/land-rover/heater-control-lights.202204/

The heater control illumination is not just a case of replacing knobs I don't think. Hasn't been discussed for ages I don't think, but there are threads about it. I remember threads about it when I got the F1, but didn't fix it at the time. So...

What ever you do - remove the inside cover on the door before closing it. If you manage to close it, but then can't open it again, you'll be cursing if you don't. I agree, you are almost certainly up for a new regulator (motor, wires and...