Recent content by Goliath205

Where did you get them from please? I noticed today that my drivers door seal is knackered! I spent today changing the heater matrix, I had to do it twice as I managed to split the first one and didnt notice until filling up the system with coolant! Luckily a local place had one in stock. Not a...

Haha ok sure, so about 6 ugga duggas? :p

Thanks for all the tips guys, I'm pretty sure undoing it won't be a problem with my makita gun (either the 285z or the 1002z), but not sure how I could get it torqued back up to spec when putting it back together. I should be able to make a tool if I do need it, I'll see how I get on, hopefully...

Is it safe to use an ugga dugga gun on it? If not i'll try and get hold of a tool, or make one!

Thanks, that's useful to know! Yes I plan to do the cambelt replacement first and time it up just using the timing 'pin' in the pump - then after that (and after running it for a few days) I will use the dial gauge to double check it is spot on. That's the plan anyway!

Thanks for the info, so if I bought the kit I linked to above then I would also need this kit as well to do the cambelt? https://www.ebay.co.uk/itm/Defender-200-300tdi-Timing-Belt-Tool-Kit/203169793226?hash=item2f4ddd04ca:g:aQIAAOSwglZfpU9m

Hi there, My Discovery 1 doesn't seem to be running at it's best, it's a little sluggish! Also I have no history of a cambelt change so I thought I would kill 2 birds with 1 stone and get the cambelt changed and at the same time make sure the fuel pump timing is correct (before I start messing...

Hi all, Sorry to bump an old thread. I'm based in Bristol and have a workshop in Bedminster so if anyone could benefit from a dry space to tinker or need to use a ramp, welder, sandblaster, powder coater, tyre machine etc then drop me a message and I'll be happy to help out. I've not found...

Hi all, I'm from Bristol and have had my discovery 300tdi (manual) for nearly 2 years now. I'm looking to do some upgrades on it so have joined up here for some advice. Before I start tinkering I want to get the cambelt done and the fuel pump timing set exactly right so any pointers as to who...