Recent content by Glack Attack

i am out of the country for three weeks but will check this once I am back and let you know how I get on. Thanks for all your help with this.

Yip - headlights on and all other lights. Everything works as it should, also the dash lights. I checked the voltage by using my multimeter and sticking the ends of the terminals of the white connector. Would that be right?

Checked the voltage at the switch, looks like 0V. Might try and take a supply from somewhere else. Any thoughts?

I will get round to checking the voltages this weekend hopefully. Might just have to bastardise the loom that I have and see if I can get it working some how.

Didn’t even occur to me to check voltages, I will try that at some point. How would I go about rebuilding the loom? Just a new plug connector?

Good Evening everyone. I need a new wiring harness for the temperature slider controls area of the centre console on my 2013 Defender 90. There are 4 bulbs that currently don’t light up. Three of these lit up previously with a bit fidgeting with the controls. I replaced the bulbs but made no...

Hi again. Some more careful pro-ding/poking with a needle has done the trick. Thanks for your help.

Hi folks. I will try cleaning out the nozzle again and blow through the lines to see if this helps first and report back. Thankyou.

Hi Forum. One of the jets on the front windscreen of my 2013 Defender 90 Puma is not working. Reservoir is full of fluid, pump runs with no problems and one side does spray. I have tried cleaning out the nozzle with no luck. This has only stopped working recently. Any ideas on a fix? Thanks!

Just got round to doing this. Luckily it was the fuse and not the switch for the reverse light. Thanks for the advice.

Studied the lighting diagrams but cannot work out which fuse it is for these bulbs. Can you help? Thankyou.

Hi again. I have also replaced the 4 bulbs in the centre console around the temperature control and sliders underneath the stereo but these are still not lighting up. The bulbs that were there were all burnt out and the glass was black. These are still not lighting up. Do you know if these are...

Perfect, thanks for sharing this! I couldn’t see a diagram on the bottom of the metal cover. I will investigate this and see what comes of it.

I checked underneath the seat but there was no diagrams to tell me what one was F10. Did have a look at a diagram on google but it was pointing to one of the black relays. Can you show me exactly what fuse it is? My next port of call will be the switch. Thanks!

Can you tell me what fuse it is please? Thanks for replying!