Recent content by Gain Cobain

Hi dear Artic, nice to hear from you, don't worry, I was notified by friend Kernowskivenski in the meantime who explained everything to me, thanks for your help, see you soon.

hi friend I wrote to you but you disappeared?🔭

Hi Artic2 I'm happy to read you, thank you for your availability, unfortunately I first called the workshop before going to them asking if they had the right software and they told me that unfortunately their system reaches 32, so I didn't go to find them easily because they are located a bit...

hi friend glad I'm not alone in this…. However I found a website where you can presumably buy these CDs but the problem is that they are at a later step than the one specified in the guide we are following (t4 on rds 6 and dtl35) logically one would think that they could It still works but I'm...

good morning everyone, I've been trying for some time to replicate the feat for activating the external temperature, I found a workshop that would let me use their T4 communicator but unfortunately they don't have the DTL35X disk, please ask anyone who has it help me find a copy perhaps with a...

so could I even make the holes by threading them and injecting the chemical product and closing the holes taking advantage of the car's natural rotation to carry out the various washes without even disassembling the shaft?

how can you be sure that despite multiple washings there is no old silicone between the discs knowing how dense and old it is!?

I will put a little, the minimum amount that serves to be sure that there is lubrication even in the most difficult to reach points between one disc and another, this precisely because that liquid is very dense, due to the axis position I will make a mold in concrete inside a bowl with the vcu...

what I will do is weigh and then open the vcu with a nice clean cut on the lathe, then I will clean it well disk by disk and internally, then I will put everything back to how it was and I will put a little silicone between one disk and the other taking into account how much I have used for each...

the way you recommended, thank you mate

I was reading 160 ml. opening it completely and cleaning well inside disc by disc, is this correct?

hello all, can anyone tell me how much silicone liquid is right inside the vcu?

Symbol

Hi mate can you help me?

hello everyone, I read the thermometer topic in depth from Bounty and I find it difficult to connect the control unit of my 2006 Freelander td4 to this omnitec t4 because it did not find it… can anyone tell me an alternative method or if it is possible to send the control unit for edit?