Freddie17's latest activity

I have a Bambulabs X1c and it is excellent. The AMS allows it to print up to 4 colour models. Baby Groots anyone? The milwaukee box was printed too.

Hello everyone! Finally I have good news: My Freelander is back on the road! The only problem was actually the large fuse 120A from the alternator. Nothing else broke. I had no chance to get the fuse here. That's why I had to order it. When you...

Ok, great, you're in a good place now as you have the detail. This is almost certainly a boost leak so start with the easy stuff, pull these two pipes off and inspect them thoroughly for splits, it's a quick easy test you can do: If they look...

Écho !! 😜

Well done, and welcome! Now we need pictures!

Yes it is - the gun is consistent, the ammo is consistent (unless you keep changing it) and the scope is consistent (might be ‘out’, but will still be consistent). The shooter and the wind are the variables. That’s some claim - over what distance?

I’d start by running a single jump lead from the battery negative to a good earth point on the engine somewhere (starter if you can get in there) - see if the problem then goes away, indicating a poor earth as mentioned above. Not sure why...

Haven't experienced this in a LR, but had a similar issue with a Micra. The issue was a corroded earthing point and partly ruined wiring. Check wiring, check earth points and check if it's charging, like JD said.

Don't see why not if access is good.

I’ve also found a Dremel with a flex-head and cutting disc to be very helpful with bolt removal in tighter spaces