foggy23's latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  • F
    And she’s back! Will do a full write up of my process later, but through the MOT last week and good to go despite some last minute dramas. (Crank sensor, broken fuel line ends, non starting the night before MOT). Most satisfying part is by...
    • IMG_4227.jpeg
    • IMG_4241.jpeg
  • F
    So body is on and bulkhead is changed! Fresh LOF Power spec clutch went in, she’s coming together! Still a couple of issues to address though before MOT..
    • IMG_4186.jpeg
    • IMG_4205.jpeg
    • IMG_4158.jpeg
  • F
    foggy23 replied to the thread TD5 Starter Wiring Question.
    Sorted that issue, left as it is initially and it’s started no bother a number of times. Issue now is it keeps on forcing off the Fuel line into the engine and creating a diesel waterfall
  • F
    foggy23 replied to the thread TD5 Starter Wiring Question.
    It’s got the main live, and then from a separate loom the spade plus a brown wire. According to wiring diagram it’s a brown from the starter to alternator but it just doesn’t seem right. This is how I have it at the moment but who knows, she’s...
    • IMG_4203.jpeg
  • F
    Hi folks, Currently rebuilding the 110 TD5. Only issue I'm coming up against is that I didn't take any photos of the starter connections when removing it. Putting it back together I know both the power supply (direct from battery) and...
  • F
    Been away for a while so here’s the next update; the chassis is in. Decided not to paint it as I was only going to have enough to do half of it; plus I like the look 😂 axles tidied up, brakes replaced, suspension and bushes replaced, some spicy...
    • IMG_3941.jpeg
    • IMG_3987.jpeg
    • IMG_4055.jpeg
    • IMG_3945.jpeg
  • F
    Currently in the middle of a chassis/bulkhead swap on my TD5 110 truck cab. I’m getting to the stage where I’m going to split the body and I’m considering turning it into a King Cab whilst I’m at it. I’m planning on fitting a flatbed/tipper...
Back
Top