Flossie's latest activity
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Flossie replied to the thread Fuel sender(diesel) outlet size?.Shiny new sender, gave the tank a coat of some left over green chassis paint someone gave me a few yrs ago. Clashes a bit with the silver chassis . -
-
Flossie replied to the thread Fuel sender(diesel) outlet size?.The sender has come and is 8mm od. The plastic fuel pipe is 10mm od. Ideally I need a compression 90 deg elbow, 8mm one end and 10mm the other, easy to get in a straight fitting but appears impossible in an elbow, never mind....I'll get a 10mm to...
-
-
Bypassing an egr with a dpf fitted is not a good idea, i think. I have the 4.4 tdv8 with dpf deleted. Of course i don't drive that on the road because that's dangerous and illegal. I don't know but presume the dpf has had a sister delete but I'm...
-
Flossie reacted to kermit_rr's post in the thread What are some essential tools and parts to have in a P38? with
Like.
Spare engine if it's petrol -
Flossie replied to the thread Rusty wheel nuts & studs.You can get stainless nuts, fitted them to mine maybe 20 yrs ago, still look great.
-
Flossie replied to the thread Fuel sender(diesel) outlet size?.That might be an option. I should of mentioned that currently I have the later 300tdi sender fitted which is now knacked, it came with a second hand tank I got off ebay, the tank unfortunately leakedwhen I removed the cradle to clean it up so...
-
If you are using the compression fittings drill.. Is there room to drill another hole in it & use a bulkhead fitting(allows the nylon fuel pipe through & then locks off) right angle out the tank & away you go… You can do the above on a 90 tank...
-
Flossie reacted to Rubberknees's post in the thread What are some essential tools and parts to have in a P38? with Haha.
Everything mentioned above plus any thing we may have forgotten
