Recent content by flatpack

Hi again Jacked the front up and bled again and got some more air out now feels pretty much like it used to. Thanks for advise

Thanks for the advice. Bleed nipple is above the inlet so although the Gunson was passing fluid through without any air bubbles at all I'll jack the front up so any trapped air goes towards the bleed nipple Thanks again

Hi Came to use my 1985 90 V8 this morning and no clutch. Master cylinder reservoir was empty and I know it had a history of the level dropping so got another slave cylinder. It's an FTC5071 which I believe is the correct one for the LT85 and it fitted OK. Clutch rod seemed attached OK to...

Hi I've got a 1985 90 V8 with a Lucas A133-65 alternator into a Lucas 4BD blocking diode for a split charge. This was the standard factory fit setup. Now I noticed today that the dashboard voltmeter was down. Put a multimeter across the battery and with the engine running at about 2500rpm and...

Hi I don't think this problem is internal more that the linkage hits the top of gearbox and only just moves far enough. Doesn't happen very often and doesn't seem to be related to how it's being driven, so not load or oversun realted more to do with if it's been in low box and after changing...