Recent content by Flasharry

Hi I have just completed converting this fletcher from petrol to a 300tdi from a 96 discovery ,all conversion parts have been made from scratch as I was unable to locate off the shelf parts , the TDI is mated to a mercruiser alpha outdrive , with lightened flywheel ,and heat exchanger cooled ...

Hi Triggered fault by relocating front sensors, The problem with the system is i cannot communicate with the air bag i.e when i plug it in i get error in connection , there are no side air bags just steering wheel and dash, What i need to find out is where the loom runs from the diagnostic plug...

Had the same issue ,no 4 and no 6 blowing , By the time i removed the manifold i had 3 more sheer off :mad: Fortunatley they all drilled out , but took a total of 7 hours , so be prepared!!;);)

Hi all Triggerd my air bag warning light ! I have the kit to resett but seems to be a break somewhere (i have checked the kit on another p38 which is working fine) Is anyone aware of faulty plugs ect:confused: Any pointers gratefully recieved, Ta ,bill .

Jesus , i cant believe you brought god into it ,now were in the poop!!

Forgot If you unplug the yellow air bag sensors , which you will need to move dissconnect battery , and make sure when you bolt sensors back on you have a good earth, or the dreaded air bag warning will occour,

Lights first, if you have the same lights as me , oh dear a proper tit to fit , but i had no info to go on. Be aware wipers have to be romoved from headlights(keep trims on). All protruding parts of headlights must be romoved, ie top mounting brackets,and anything that sticks out , these...

It is bliss apparentley ;)

Removed old bumper brackets, fitted bumper without crossmember first, then Measured distance for crossmember and welded in , note, remove the steel slide out brackets from ends of origional bumper keep the white nylon blocks and screw them to the new bumper(some light trimming required, this...

Oops nanocom not communicating either , best start looking at wiring i suppose :D

Hi to all ye nay sayers, Yes it can be done(water is hydrogen and oxygen) It just needs investment, problem is if you perfect it you will dissapear into thin air, Whats the government going to do! Tax water ! Then theres the oil companys, I have tried this little exsperiment in my shed , but...

Done mine a while ago p38 to 2006 overfinch , it all lined up ok just needed to trim up wings ect ,took a full weekend to complete but well worth it (pic on my profile page) Ps all parts were £300 ebay + 1 tin black paint

Hi guys Done this one in my shed 12 volt charge from my booster/charger was ample power, Started with plain water which produced a small amount of hydrogen (tested by lighting it) very impressive, Moved on to sea water which produced about 10 times more ,but when put under vaccumn it...

I have the diagnostics to clear the fault , which is why i wasent botherd about unplugging it, but the bugger wont communicate , (hawkeye + grey adaptor) £350 and it wont do the only thing i need it to, I guess i will have to test it on another p38 before i send it back ! Mind u it got rid of...

Cant believe it hasent sold, Have you tried selling the no plate seperatley,