Recent content by disco dude

Clunk: Watts link bushes I guess if its side to side movement (try rocking the rear side to side as that sounds like it comes from the front) Possibly the uj thing in the props if on or off drive need to get under and inspect the ujs Suspension: unsettleing a conection or the compressor unit...

Yes a vac pump that has a gasket between it and the block but the common fauld is the rivets strech that hold the cover on at the other end then it leaks oil from there

Cv joint

Wheel bearings

Chek its not something in the brakes or loose in that area

Ok drain the diff oil

A frame ball joint?

It's not as bad as you think as long as you have the tools for the job ;-)

Nanocom works well on the d2 and can do p38as well so the nanocom info says As for the hawkeye I do t know

U will have no massive pressure in the lines. 3 bolts hold the pump and 3 for the pulley ATF dexron 2 or 3 bout a Ltrs Put on axel stands run the engine and go lock to lock a few times (will be a lol stiff at 1st Then get someone to hold the steering on a lock and crack the bleed screw on...

Welcome

Deffo need them These and a beaker bar all helped

cool ill give it all a go

Yup my bad cam belt came with tensioner it was an after thought for the idler to be replaced

The pully is the right one and looks very good but I purchased one of them incase as well