Recent content by devonlad108

It isnt that amazing, he just never takes it any where to get it dirty!

Hey buddy, i got hold of a heavy duty spring kit with a set of delphi +2' shocks, its a slightly tougher ride, but will be ideal for towing, the back is more solid now. A friend of mine was on lifter blocks for a while, and i prefer the ride from the upgraded springs rather than lifting them up...

Well, today was wiring day! I dont know whether i should show you guys these images, as the state that i have left it in does not belong in a land rover of any kind. Anyway, here goes, i plopped my new switch panel in today after fitting it with many switches for many things! As we all know ...

She got some (nearly) new boots today. although noisy as f**k, they arent terrible! Just got to see how they perform offroad now... By the way, they are Insa Turbo Traction Tracks, a copy of the very popular BFG Trac-Edge. I have them in 265/75/16. My old tyres were 235/75/15 and these make a...

It depends, the first lane is manaton. Its good to take an un-modded disco, ive driven my old pug 306 up there before, admittedly it took some ragging, but it got up!

Also, stu, Damn you doing something before me but me blaming you... Im also confused

Bit of an update, got me 2'' lift fitted at the weekend. A few rusty bits found, some very rusty springs and some fairly leaky shocks! I would have some pictures but for some unknown reason, my damned phone isnt saving anything. Anyway, on sunday afternoon i decided to go out and have a bit...

have you checked the valves are lifting as they should? take off the rocker cover and crank it over. i would unplug the stop solenoid just in case it does fire. the last thing you want is oil ****ing everywhere!

Somebody appears to be missing their drive member. looks like you wont be going far!

You have the 2 button locking so therefore no spider. it is all controlled from the alarm control unit. You will have a 3 wire DDS fuel immobiliser so very difficult to bypass. easyiest bet is to put a new ACU on. simply unplug the old one and plug in the new. i would recommend unplugging the...

Fairly easy job. If you pull the 3 heater control knobs off and the slider knob, use a flat driver to prise if you want, just be careful not to scratch. you will see 2 screws behind the 2 heat control knobs. undo these and simply lift the front off. i think you can then access the switch in...

thats holbeam lane, just off the ashburton road, you will probably know it, lots of deep puddles and a play area of sorts! And to answer you Phil, the led's arent very bright, they are only there as marker lights really, i dont notice them at all while driving. the flood bulbs are standard halogen

I have a 2 button fob on mine, so is easier to replace the whole unit, which i did, but as above, there is no need on a single button system, the fobs are DIY programmable, so no need to buy more than you need, which is essentially nothing if you have an unprogrammed fob

Today I finished modifying my roof spotlamps. I thought it would be a bit different so i added 2 5mm LED's to each lamp to light with the sidelamp circuit. I think, during dark, it looks pretty darn good...

Its been a fair long time since ive updated this, but here goes! In the time since ive had her, she had her MOT, and passed second time around. My welding was good enough thank goodness... Well, i had taken her out greenlaning quite a bit, and had a good old play. And then it came to new years...