Recent content by davethebuilder
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
D
The bearing press kit for the front main ball joints top and bottom had a perfect fitting sleeve + a dump hammer which I used
-
D
Hi Anaconda
Thank you for suggesting to use a NAK driveshaft seal fitted one today and the problem is now solved!!! What a relief the NAK seal is a lot tighter to fit and also tighter on the shaft don't use OEM or genuine they're crap! As I found out I would also like to say a big thanks to all...
-
D
Hi Andy
Thank you for suggesting to use a NAK driveshaft seal fitted one today and the problem is now solved!!! What a relief the NAK seal is a lot tighter to fit and also tighter on the shaft don't use OEM or genuine they're crap! As I found out I would also like to say a big thanks to all that...
-
D
Didn't think of that I'll check thanks
-
-
D
Mark I've tried silicone grease normal grease coperslip but not KY jelly yet Ha Ha
Thanks Mark
-
D
It looks fine it's just doing my head in Thanks for replying Mark
-
D
Thanks Andy will try a nak next time
-
-
-
D
Sorry for that didn't think the first one posted correctly just me being dumb
Thanks for your reply Anaconda will try NAK seal
-
D
I just can't stop the front drive shaft seal leaking I have fitted three non standard so far the last one only leaked a little should have left it at that but Yesterday I changed damaged ball joint rubbers and thought as I was there I would fit a genuine LR seal at about ten times the price and...
-
D
Hi All
I'm rely ****ed off with this problem because it's a pain to keep changing this seal . I've fitted three non genuine seals that have all leaked all at different rates the last non genuine only leaked slightly I wish I left it at that. But then I thought I'll buy a genuine seal at about...
-
D
http://www.discovery2.co.uk/Oil_pump_bolt.html Hi Stanleysteamer please paste this into your search bar it gives you all the info you need on replacing bolt and gasket. When you have removed the sump you will notice toward the rear there is a separate casting which holds the main crank seal...
-
D
Thanks Stanleysteamer I will be using extra rtv this time!!!