Recent content by davesrover

you could try checking your injection timing, and try taking the cover off the pump (4 screws) an see what position the center point mark is possitioned, standard it should be sitting around ten past twelve position. try taking the pipe off from tubo to intercooler,if theres oil, it may be oil...

The front door speekers are a pain,but ive been told of some sort of deeper consoles they can sit in, try a reputable retailer NOT HALFORDS,they may help, good luck m8, Dave 300 tdi es.

depends on the year and model ie, es ,xs ,or bog standard. If its 94 onwards it should have it fitted, phone yourlocal dealership with your vin plate numba and they can check for you,an may be able to order a new one for you. good luck hope this helps, Dave 300 tdi es proud owner.

there are some tidy disco's out there 94 to 97 year models for around £1,500, try to find one that does'nt need too much welding. sills rear arches and boot floor are common spots to look at, i own a mint 300 tdi es model and pay around £300 fully comp, i'm 46, good luck.

not being funny mate, but if you know your mistake then why ask us ????????

to answer your question, as long as the rims and tyres are both 16 inch, they will fit.

i've just replaced my springs and shocks all round BRITPART H/DUTY they are marked front and rear,if you fit them on back to front it'll sit high on the front and low on the back.they have raised my disco by an inch and half, drives allot better now.

i've used paddocks a few times, last time they sent me the wrong floor mats twice,it's the hastle of returning the items,and having someone in at the time.

i've been told saw dust in the box mixed with the oil,BUT NOT RECOMENDED AT ALL, other than that a box from scrap yard,or a recon which i've opted for and cost me about a grand wiyh a new hd clutch.

hi there, i just joined i'm a disco lover enough said,i'm here for a chat if you like.