Recent content by Dave92

Cheers mate :)

Hi again folks, quick question about anti roll bars.Is it worth just replacing them along with a suspension freshen up or just giving the originals a clean up and coat of paint? No heavy off roading etc..just giving the motor a decent suspension going over.Thanks Stewart

Good luck with the project mate :) Ive an ES as well, in the process of replacing every bush from back to front and uprating the shocks while Im there although retaining a standard look from outside.Great projects :)

When the engines switched off the difflock lever works in all positions fine,goes from high to low,side to side no problems however once started and in nuetral etc..theres no budging it,tried rolling in nuetral,rolling backwards downhill in nuetral also and still nothing!Any ideas?

May look into that Peter,Ive a valeting company and a few facebook detailer friends over there that could possibly ship me a set over.Thanks mate :)

Sounds good to me Zen :) Thanks mate

Which is the best Magnecor leads to fit to my Disco folks? Hoping to cure the crap running issue Ive brought up before.Cheers Stewart

Thats the plan John, genuine dizzy and rotor arm and the Magnecor 8.5 mm leads andtake it from there mate :)

Will do mate, Ill try the OE dizzy cap/rotor arm first.Thanks

This is the Lpg system type

Sorry Zen,3.9 petrol v8, system unknown as Ive not had it long or checked but its single point with the gas with the venturi type gas feed.Ill check type and take a few photos tomorow aswell mate.Was going to try and replace the dizzy cap and rotor arm with genuine parts then maybey magnecor...

Hi folks, my disco 1 goes like a train on petrol however the gas kicks in and it seems like Ive a V4 lol.The previous owners replaced the plugs with NGK's and the leads and dizzy look new, the leads dont look the greatest though to be honest.Could this be the fault? Also it was backfiring into...

Thinking of changing the cast iron manifolds on my Disco 1 ES for tubular ones,waste of time even just for cosmetic reasons?

Ill take them back out and check the voltage also,cant be anything serious...thanks for the pointers :)

Still have sides at the front.One side was working replaced bulb to one that wasnt and now nothing..