Recent content by Dan333

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Dan333

    Series 3 diesel skew gear

    Hi yes I have just checked the EP and dti is spot on rotated and checked same spot on here is a picture of the skew at 13 degs,I did discover the old quill has a twist on it, new quill is nearer the mark but not right on it , this seams the nearest I can get it, thanks for your reply thank you
  2. Dan333

    Twisted quill under injection pump

    That's really interesting thanks for your reply, I think I'm going to get the pump checked
  3. Dan333

    Twisted quill under injection pump

    Hi Steve I'm going to check that tomorrow, thanks for your reply
  4. Dan333

    Twisted quill under injection pump

    Hi I have just noticed that the quill has a twist in it it's off a bit,does anyone know how this could have happened, been trying to set the skew timing series 3 diesel and thought this is the problem but put an old one in and it is still out but not so much see picture that seams to be the...
  5. Dan333

    Skew gear timing

    Hi thanks for your reply,I have been turning the oil pump spindle the nearest I can get is 10degs either side of the 20 degs, I'm starting to doubt if it will sit in between the two either side of the 20 degs, thanks for your help
  6. Dan333

    Skew gear timing

    Hi yes I have one, can I put it like in the picture and adjust the pump to suit
  7. Dan333

    Skew gear timing

    This is day 3 aaahhhhh
  8. Dan333

    Skew gear timing

    Hi I can get it like the picture and same distance on the other side of 20 degs, is it possible to get it between thanks for replys in advance
  9. Dan333

    Skew gear timing

  10. Dan333

    Skew gear timing

    Hi can anyone tell me if I'm near enough to the mark check picture, this is a nightmare to do this seams to be the closest I can get, is it close enough, looking forward to your replys
  11. Dan333

    Series 3 diesel skew gear

    Hi thanks for your reply, I will try that
  12. Dan333

    Series 3 diesel skew gear

    Hi can anyone help with this question, I have just checked the timing as landy is running but takes a lot of heating to start,I noticed two pictures on line of the skew gear and they have the master spline at 20 degs , and mine is set at 180 degs further on meaning I have the female spline at 20...
  13. Dan333

    Electric hand brake module programming issue

    Thanks very much for all your help it's good to chat to someone who knows what they are talking about, l just would like to tell them that some things wrong with there soft ware and I not happy to pay for what is there errors Thanks again 👍
  14. Dan333

    Electric hand brake module programming issue

    The auto stop is intermittent not worked for some time and some times boot wont open unless manually , didn't know it has two batteries?
Back
Top