Recent content by dadwalker

Result! This info would have saved me time and money so here it is... Sedimenter sucking in air. Once removed the engine started first time! Been starting and running perfectly for the last week or so and the occasional lack of power has gone. It must have been dodgy for some time and once I...

Soaked to the skin with rain and diesel! Tried all of the above. Same flow rate after the pump, filter(correct way around, marked with arrow on the side and out on the top) and also in the engine bay after the lowside fuel pressure sensor and at the HP pump inlet. But the said flow rate is...

Thanks for the reply buddy. I did check all visable pipes for bends etc before switching on. I'll have a look all round again just to be sure. I have had the inlet manifold off and cracked open the HP fuel lines. No fuel at the injectors unless I pinch the LP supply pipe(with pump running)...

Please help, I'm off the road and not earning as a result Could anyone out there measure the voltage they have on the low pressure fuel sensor under the fuse box. please? My TD4 was running but had an intermitant judder and cut out once in a while like there was a lack of fuel so I started...

HP pump is fine, it appears to be under voltage from the LP sensor that is stopping the HP pump from running. Replaced LP sensor but still getting the same 1.3ish volts from it. Cleaned the in tank pick up but it made no difference. Anybody know what the voltage should be?

Hi, I just changed my TD4 LP(2004 wheel arch) fuel pump as the old one sounded like it had no bushes left and I had intermitant fuel error via OBD/PC with the odd splutter now and then. All fitted with fuel squirting from the return pipe but nothing comming out of the HP to rail outlet...

Hi, you still got the Freelander cruise control info??? All the best, Dave.