I have no idea my nanocom had some other codes there also which was confusing.
I took cover off and re did all good now.
I’m not that experienced with it so I probably did something weird
In the settings I scrolled through and saved complete accident.
There is an injectors and throttle menu.
I must have written to ECU thinking I was saving other setting I changed.
when I checked back today they were all 5 blank
I recently used my NanoCom to turn on the heated windscreen. Since adding this I have have had really smoky TD5 Disco 2.
I think while tinkering I may have inadvertently change another setting or settings accidentally.
Any advice as to what...
Removed front O/S footwell carpet today need to have hole in bulkhead behind pedals welded to give it more strength.
Carpets are in the house drying out not sure how long that will take.
MJS Headliners re-covered my liner. Great service...
For the Dash I used a combination of 501 LEDs and some smaller T4.7
However the one on the Dash that illuminates the mileage is completely different.
I purchased a small replacement bulb for it but cannot get the old one out.
Are they supposed...
Just want to check with you, I got the new Front Heated switch working and when I press the demist button on the Aircon now both the rear heated and front heated switch LED's flash together is that correct?
After reading lots of threads about various alarm/immobiliser issues i have a recommendation ... when ever and no matter for what reason you plug in a tester, beside the main reason for what you've got there, enter in the BCU menu too and set the...
Will check again tomorrow, switch was not lighting up, did not illuminate with lights on like the others and did not have the red led lit when enabled with Nano com.
Tidying up my Discovery 2.
Drying out, replacing headliner, fixing sunroof seals and leaks, replacing roof bar seals and adding some blue LEDs to the dash and Temperature Console.
Also filling holes that a previous owner used white silicon and...
I am having the windscreen fitted next week, today I installed the switch to the top right above the heated rear switch, added relay to 8 and both 40amp fuses. I've enabled the BCU with NanoCom and saved. Would I expect the switch to...
I've got my temperature console out, replaced all 6 bulbs but still only the LED centre display lights up.
Any idea how to fault find on this to get bottom and up/down switches lit?
I used this fix:-
Leaking Sunroof
The problem with the sunroof is never the rubber seal. The problem is the connection to the roof tray. The tray is metal and the drain pipe is connected to a plastic outlet box which is factory sealed with...
This post just about sums up the D2, I keep asking myself why do I keep it, found this after driving through flood, it had been fine previously. Who sticks metal to metal with Silicon and expects to stay?
Carpets soaked and no easy way to dry...