Recent content by crazymac

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    James Mac's Defender 90 Rebuild

    Defender will be cheaper than a baby anyway !! Stop slacking James and get it done!
  2. C

    Wanted D1 200tdi transfer box

    Don't restrict yourself to just 200 Tdi. Its the same transfer box on 300's and the early Td5 ones although you need to make sure the difflock mechanism is still in the box on the Td5 ones (easy enough to do with the serial number or the fact it will have a "nipple" on the top of the box) Gives...
  3. C

    From Facebook, sounds urgent!

    I was just coming on to say I have her number and just messaged her and I find its all sorted! Glad to hear it.
  4. C

    From Facebook, sounds urgent!

    I'm on the doorstep and can line up a tow vehicle in the AM. I've been in touch with one of the crew, the stuck one is Saskia and my contact is trying to get in touch with her. We'll get is sorted
  5. C

    From Facebook, sounds urgent!

    Just had a text message through so signed kn to see. Unfortunately i have no transfer box in the disco just now, hopefully back in tomorrow. However I do know several of the lifeboat crew in fishguard so will reach out in the morning to see what I can do. If she (I'm assuming she based on...
  6. C

    James Mac's Defender 90 Rebuild

    Well the head is back on but its got a crack in it so needs to come off again, I have a spare! Don't worry about the vegoil kit, see if you can sell it on as I'm trying to get a biodiesel processor so I can go the whole hog.
  7. C

    Disco 1 rock sliders

    I have pics but the uploader to the site won't work so i'll try another way. I'm looking for £50 for them, they are really solid galvanised and will take a battering
  8. C

    Disco 1 rock sliders

    I have a set of Galvanised ones, One bracket is slightly bent but will easily straighten while fitting. I'll get some pics tomorrow if you want? Where abouts are you because postage won't be cheap
  9. C

    James Mac's Defender 90 Rebuild

    Looking good James, not convinced with your poofy colour scheme but you are certainly cracking on with it, especially considering your broken neck you eejit. I notice the rear axle still has the rubber donut on it, I assume you are planning on changing that for a normal one? simple enough...
  10. C

    Water! everywhere!

    Have a look at YRM solutions for replacement panels
  11. C

    Non starting 300 with EDC after long lay up

    OK time for an update! I never did go with the bypass idea as I wanted to take it back to basics first, suck, squeeze, bang, blow! I started with disconnecting the feed from the lift pump to filter and pumped fuel through to there, then disconnected at the filter and pumped to there...
  12. C

    300tdi auto, starting in gear.

    If I remember correctly, there is an inhibitor switch on top of the gearbox that prevents this, he must have either unplugged/removed this or indeed just disturbed it?
  13. C

    Non starting 300 with EDC after long lay up

    Ok cheers for that, I'll look again
  14. C

    Non starting 300 with EDC after long lay up

    Thanks for that, i've looked into the bypass idea but as this is an EDC version the electric side of the pump is enclosed within a black box so looks to me like you can't do this on the auto EDC versions?
Back
Top