Recent content by Coo

I thought there was a sedimenter:

£250 is not bad for the job. It's back in, the four studs placed in the botom holes really really do help line it all up perfect. Also jacking the engine to tip it backwards helped to give access to the top bellhousing nut, so thats back on, didn't miss any. Just got rear prop (inc new...

Yep, new fork and staple :) Looking forward to putting it all back together!

Update: After taking the gearbox out, (pain in the backside - but definately DIY do-able with jacks, stands and hoist!!) Release bearing was knackered....so bunging complete new kit in. Going to start putting it back in tonight. Cheers All !

Well, slave is next to disconnect, so will try that... Yeah, better look at the pedal too ... Cheers

Right, less talk more action ! Started the laborious task of Gearbox removal...(engine staying in) So far: Seats out for room inside Centre console out, gearbox exposed Part exhaust out Props off front and rear Viscous fan off (tighter than a tight thing!) Loads more to do -...

Ahh, jumping to internet conclusions.... Someone has mentioned that the Clutch Master Cylinder can fail internally without showing any leak.... That would explain no fluid loss....

I can lift the pedal back up.... Didn't get to it last night, but due to go tonight. Will have abother search for Master/Slave cylinder problems etc.... I'm kind of resigned to take the box out anyway, but will see what I find. Just that I cant see any fluid leaks so not convinced about...

Right, as close to an inspection hatch as I'll get ! Also looked on this forum, it mentions it could be the plastic clip gone that holds rod to the fork... So I'll remove slave and have a look Cheers

Hi folks, 1996 'P' Discovery 300tdi Clutch pedal is on the floor, have to switch engine off to engage gear. Had a look around, the master cylinder fluid is still topped up, cant see any leakage. Slave cylinder also appears leak free, pipes and unions dont appear to leak either. Is my...

Morning All, Bought my first Land Rover yesterday, a 1996 Discovery 300 TDi After a quick search for forums, found this to be pretty busy, so thanks to you all for making it so... It's my first 4x4 ownership, have done the off road stag do things, which is a small taster I suppose but not...