Clayrr's latest activity
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Clayrr reacted to Anaconda's post in the thread Defender 110 Td5 Vibration Under Acceleration with
Like.
Some of them have arrows stamped on them for alignment. -
Clayrr reacted to tottot's post in the thread Defender 110 Td5 Vibration Under Acceleration with Like.
Find a pic of a new shaft and orientate journals as per pic. You will have a 50/50 chance of getting it right or be 180 degrees out. Frankly as most of the weight is in the main section it may well be good either way.
-
Clayrr replied to the thread Defender 110 Td5 Vibration Under Acceleration.No its the splined shaft I took off... I suppose the optimistic way of looking at it theres only 15 ways of doing it wrong if its a 16 spline shaft...
-
Clayrr replied to the thread Defender 110 Td5 Vibration Under Acceleration.Was gonna do both but front looks and feels fine so havent touched.
-
Clayrr replied to the thread Defender 110 Td5 Vibration Under Acceleration.Hello all, I've just started replacing the UJs on my TD5 and decided to clean all the grunge stuck to the yokes and like a dumbass I cleaned the markings off I put there to make sure they go on the same way they came off for balancing purposes...
-
This is the Series section and it is about half shaft UJ's where Defenders have CV units. Ask in Defender Thread.
-
Clayrr replied to the thread big problems installing Universal Joints.Hello all, I've just started replacing the UJs on my TD5 and decided to clean all the grunge stuck to the yokes and like a dumbass I cleaned the markings off I put there to make sure they go on the same way they came off for balancing purposes...