Recent content by Clark432
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
C
Okay still doesn’t feel 100%
Checked the fuse under bonnet and relay is fine
When I test the system with this computer it does bounce around so a step closer
But don’t seem to be getting anything at
Direction valve 1
Direction valve 2
Or pressure control valve
Even when driving it’s 0...
-
C
Also should the relay be on or off when running
-
C
So changed the transducer
Not much has changed but don’t get a warning light anymore
Got a different computer and did a system check it failed
Results in pics
Any ideas
-
-
C
I will change pressure transducer
Then the ecu
-
-
C
i think hoses are correct
tried the ramps
tried bleeding with nonocom but nothing happens
been for a drive but its not 100%
this is my hose set up
-
C
Will give this a try thanks for the help
-
C
Okay thanks
Won’t have computer till
right so I have the results with car parked with no lights on dash looks okay to me
I’ve also attached results with the light on and parked
I’m wondering if the pressure transducer is playing up giving the ECU a wrong reading then throwing the light on...
-
C
Okay thanks will look into it
-
C
No problem thanks for the help haven’t heard of this mod but will see what others say
-
C
The system worked well before the hose change
I carried out this work due to split in steel line
-
C
I’ve been told the nanocom codes aren’t reliable
Amber light comes and goes
Almost feels like the rear isnt acting the same as front
And when the light comes on it’s doesn’t feel like it’s work at all
-
C
Haven’t checked but thought as I was getting 100 bar things are working but not well
-