Recent content by Christo102
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
-
C
The lever has all the gears no obstrictions
-
C
Yes manually
It was all working before i changed the solenoids
-
C
How is the 1 st gear if you feel it manual because it feel like a small click
If that's how it must be then it has all 7 on the box
-
C
Yes that's the bolts I used
-
C
On the drain plug underneath the box the 24mm bolt
-
C
Yes all the gears from R to 2 is all forward
-
C
Yes but all the gear are now moving forward except p
So there is no neutral at the moment too
-
C
All the selector and lcd is rigt except not going to 1 at all now
Barrel connectors looks fine
Used the level plug next to the selector as in the rave manual
What do you mean on tick over i started the car and put it in neutral
-
C
I checked the solenoids there was a broken wire
Checked the inhibitor switch and gear selector and filled oil
All of the gears are forward it seems
-
C
Hi
I have gears now it seems fine but reverse is not working it moves back then stops and then goes forward
Won't reverse at all
-
C
Hi yes it would go to all the positions before i changed the solenoids i took the inhibitor switch off and put it back I'm taking the solenoid cover off today and will see if there is anything obstructing it
-
C
I have che ked the solenoids as well
I habe read that they say it could be the selector inhibitor switch on the top of the auto box
Is there a way to adjust it wothout the special tool?
Can this be the problem?
How many clicks from the box must it have and from which side must i start
-
-
C
Hallo everyone
I bought a 2003 freelander 1 td4 and it had reverse and went forward but didnt have power or changed gears
Did diagnostic and 8 or the 9 solenoids gave fault codes
Changed all the solenoids and no it doesn't go into park at all or into any gear seems like the car stays in...