Recent content by Chris91122

not sure if they cam off an l322 or RR they are 20" and no i haven't got spigot rings fitted , how can i identify what model they came off - ebay purhase a few years ago

when it was tested they put the front wheel on two plates under the front wheels - which vibrate excessively - " to check for wear in the suspension?"

evening all - just a quick one as you can see my p38 runs on a set of 20" stormer alloys - during its recent MOT i observed the front wheels on the shaking plates ? since then at speeds over 50 the steering shakes excessively- below 50 no probs ! any immediate thoughts ? cheers chris

evening all - just a quick one as you can see my p38 runs on a set of 20" stormer alloys - during its recent MOT i observed the front wheels on the shaking plates ? since then at speeds over 50 the steering shakes excessively- below 50 no probs ! any immediate thoughts ? cheers chris

Evening all - the beast has been laid up for the last 5 months . But purcyhe battery on and the alarm is going off like a good un! Locked he car and re opened it and still going ? Car starts and run but still is honking away ! Any thoughts / suggestions ?? Can it just be by passed ? As I can't...

Thanks guys, just checked mot database 1/2006. 50k 12/2006 55k 05/08 71k 05/09 81k 06/10 87k 05/11 188k So looks like something has been changed!! Cheers Chris

Please can you help, My RR 4.6 HSE is currently showing 190k on the speedo, but going through the MOT's It was MOT'd in June 2010 with 87944 miles on the clock It was MOT'd again in may 2011 with 188572 on the clock So 100k in 12 months I think not? This took place with a previous...

Did they quote £750 for the facelift kit!! Lights/ grille / bumpers!!

I have a problem with my rear door saying it is open but its not ! Anyway to cut along story short with the current weather I am using the car everyday and haven't time to trace/fix the issue. As a short term fix and for my sanity at least can you disable the buzzer warning ? Until I get...

Thanks saint ,next question how would I go about it? Any thoughts?

Ok so which wire is the feed for the "door open" and how do I bypass it ;PLEASE

I don't think wires are broken otherwise c/l wouldn't work , or feedback from window switch ? Or am I grasping at straws

Sorry saint what do you mean by door out station ?

4.6HSE 1998 , Newcastle upon Tyne As I say confused ?

Ok Door card off all wires look ok? Central locking works But the window won't go up or down returns window not set error from both door control and centre consul ? So power is getting to the door Can't drive car as car thinks door open and won't raise off the ground Anymore...