Iirc remember correctly the throttle will be in the idle position and any link rods inside go in the holes that relate to the code not the model but the actual code for that inj pump.
Manged to recover circlip and washer. Woohoo!!!!
Question, what is the throttle position when putting to cover back on. Is it in the fully open position when re assembled and how do I align the cold start leaver? I have noticed that the...
Found the problem when I went back in, the circlip on the bottom of the throttle has come off and gone missing. Could be anywhere inside. New pump require I think :(
I have changed the cover gasket on my 19j DPS pump. Have put it back together. The control next to the throttle (dont know its name feels a bit stiff as if its rubbing but don't know on what. I took care to align it with the plate below. I...
Has anyone got a diagram/rebuild instructions of the 19J Cav Dps injector injection Pump 8520A290A type 621. I took the head gasket off to replace but not sure I have put it back correctly. Have blead pump but wont start. Looks line no fuel...
I have a 1987 LDV90 and I really want to put black vintage number plates on it. I know its not legal in the UK as its not pre 1980 but I do see them every ware. Has anyone on hear been fined or is there a warning first?
Composite gasket? then no paste or anything else for that matter.
200 TDI head bolts could be reused up to 5 times, so 19j might be the same.
Welcome to LZ.
The Head is away getting skimmed, question is putting gasket paste on the new gasket a good idea? The internet is mixed. Also, I am struggling to get new head bolts, the old ones are in good condition and all measure correct with no stretching...