Recent content by brens-freelander

hi singvogel thanks will do. regards brendan

hi all, just for the record I genuinely DON'T own a freelander but I do own a Volvo S80 and a Mercedes E240 , both of which have never given me a days problem. Now having stated what i do own/drive the expierence that my friend is going through with his purchase really would turn me off...

hi Optimus Prime many thanks brendan

hi Singvogel thanks for the help. Q1 : there is definetly a small circular hole on the rhs of the airfilter cover as i've seen it myself. I will get him to Duct tape it up , but would like to know why its there. Q3: have mentioned to him about getting a bypass Valve Q4: no the rear spare...

hi its me back again :D with some more questions on my friends 2003 td4 1. he noticed that there is air flow out of the RHS on the air-filter assembly through a smal round hole , is this normal or indicative of a badly fitted air-filter 2. the previous owner had removed the original radio...

hi taxii many thanks for that, really appreciate it. one more job to do as the previous owner only removed the rear prop so i don't know what strain is been put on the rest of the system including the IRD section by leaving the other piece running still attached ?. thanks again brendan

hi taxii thanks for the info, so you left the ird section in place as per the attached photo or did you seal it up in anyway. ah this hdc seems to be a right royal pain , but we will keep on trying :confused:. once again thanks for the help brendan

hi all thanks for all the help , working our way through them slowly. He had the hdc light on intermittently when started and we changed the brake switch and adapter cable but this fault is still there intermittently :mad:. If started and no light shows then pressing the hdc switch on and off...

hi hippo already tried that without success but thanks anyway. I can hear the motor working and fluid comes out of the washer bottle for both front and rear wash once tubing disconnected. regards brendan

hi vissie thanks for that , yes that's were it is alright where should it be grounded to or can i make up another grounded connector and join them up ? thanks again brendan

hi Optimus Prime,Teddywood1 & angeloc thanks for all your help phew, great to be in a forum of experts many thanks for all your help is greatly appreciated. now the only 2 items remaining are the dangling spade wire connection at the rear drivers wheel and the path of the rear washer tubing...

Hi many thanks for at least removing 2 of the items. I thought that a blanking plate is needed once you remove the front prop-shaft ? . like i say I'am a novice but getting there :-D thanks brendan

Hi all I was helping a friend with his 2003 automatic td4 freelander today and found a couple of oddities: 1. the previous owner had removed the prop-shaft to the rear diff from the middle while leaving the front to the middle section in place. I know that this is quite common practice...

hi eightinavee is this procedure the same for an autobox as a friend of mine is having the same problem on his 2004 freelander. the HDC button is the one that's just behind the gear select stick ?. thanks in advance brendan

many thanks for the help its appreciated greatly regards brendan