Recent content by blueski

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. B

    hello another misfire question

    i cleaned all codes and replace some burn wires...now after drive it for 40 miles codes are back ...p0300 p0302 p0304 p0306.....i think bad timing because rough idle ..but fine on high idle don't know why....clueless
  2. B

    hello another misfire question

    P0171.p0300.p0306.p0301.p0304
  3. B

    hello another misfire question

    he erased the code and they come back in 30 second
  4. B

    hello another misfire question

    my mechanic just replace my freelander 2004 timing belt and now i have 3 misfire ..cylinder 1,4 and 6..any idea? the car was running fine before and now i have a problem ,,please do you have any clue? thanks
  5. B

    help me with these codes...

    thank you ,also i had to hold the gas pedal to the floor to keep the car running if i release it Car shuts off
  6. B

    help me with these codes...

    about o2 sensors?
  7. B

    help me with these codes...

    ok thanks
  8. B

    help me with these codes...

    freelander 2004 HSE ,,fault code P0304 P0306 P0303 P0300 P0150 P1472 P0174 i replaced all coils and plugs and vis motors and still misfire ,don't know what to do.can you help me ?
  9. B

    freelander 2004 2.5

    yes coolant run low before ..no water in the oil ....i changed the VIS motor it was my first issue....tuneup...sorry just spark plugs and coils..
  10. B

    freelander 2004 2.5

    P0300, P0301, P0303, P0304 did a full tuneup the problem still the same , same code ..running very poorly . The power just dropped off and now it idles very poorly and loud . It cannot be driven also P1472and P1471..replace both VIS code no longer present ........the freelander also engine...
Back
Top