Recent content by blacklandyone

No ####ing get it right only wanted a few tips but saw the light and scraped the nail off **** and got a pajero. I want be sucking up to any other clubs

Thanks to everyone wot has tried helping me out. But for the size off this club there in not much help really. Don't know why i joined really so if admin wants to take me off feel free

Its all brand new. The arm wot the fork goes on was sized up so had to unfree it

It is all new. When putting into gear it's like there isn't pressure and one lifting the clutch pedal it's there biting

hi, i have done the cluych kit, the master and slave was all ready done

Where do i start. Got a t reg freelander 1.8 petrol. Put new clutch slave cylinder new bracket and clutch is still biting at the bottom. The fan won't kick in so need to know which rely it runs on or if anyone is in Sheffield and would pop and have a look and give me some advice please

Clutch had gone. Put a new one in and its biting at the bottom

Thanks. Got a new bracket and clip. Just hope it sorts it out

Right. I better get one cos don't have one on mine

Should there be a vlip that holds the slave into the bracket that bolts to the gearbox. If so anyone got a piccy off this plz

ya clutch arm is free done that, going to get a new bracket

it looks in a bed way, will get a new one

the 1.8 petrol

hi, no take it i need one off them ?

Right. I have fitted a new clutch kit plus it's had new slave and master on. When i put the clutch down and put it in to gear the clutch is bits at the bottom. Can someone let me know if it needs bleeding. Thanks Mark