Recent content by Bigmixer

I've noticed the idle on my 4.4 has dropped to around 500 rpm (hot) and also that the top hose from the breather at the back of the engine is partially collapsed when the engine is running. Before I dive in has anyone seen this before? Thanks in advance...

Can I ask if anyone with a converted L322 has their air suspension compresser in a better place than sitting in the boot? I faffed about all morning looking for an alterative home for it, after all the spare wheel will live in the boot now and I'd rather not have the comp. there as well.

Hi Adam, I'm not going to do it at the moment, I feel you may be addressing the symptom of a previous overheat rather than the root cause, as you said yourself. I will however be aware of the issue and will check my running temps. on both petrol and LPG using Rovacom rather than the...

Adam, thanks for that, I've read through them. I've taken the plunge and there's a Romano kit sitting in the corner of the garage waiting for the Chrimbo hols!, also a Rovacom on it's way.:D I'll update when I have some progress to report, Ivan

Am I right in assuming that the splines refered to are where the front driveshaft goes into the diff. and checking would be a matter of removing the driveshaft to inspect? This will have to go onto my list of "things to do", Bigmixer

:) Thanks for that, I'll get a new wear sensor next week and try it, Bigmixer

Hi eightinavee, I'm in N Ireland. Do I need to replace the wear sensor? I just swapped it over to the new pads. I don't know of anyone local with more than simple diagnostics, hence time for Rovacom! It's better than main dealer at £95 just to plug it in!:eek...

While I'm in the way of asking questions, has anyone fitted LPG to their L322? I'm on the brink of ordering a Romano (sequential) kit and would welcome comments. I previously gassed my P38 4.6 with good results. Bigmixer

I got this message this morning and after fitting new pads it's still there:mad: Can anyone confirm that a "plug-in" is required to clear this? If so Rovacom SV here I come! Comments welcomed from anyone who has this system, Bigmixer

There was one on e-bay recently, they come up fairly regularly, Bigmixer

Thought I'd introduce myself and my Rangie. I've just bought an L322 V8 Vogue to replace a P38 4.6 which I had for 18 months. This was my first Land Rover. To date I have done all my own work, though I'm apprehensive with the L322. I'm off now to beat the "search" button to death in search of...