Hi All
I had problem with my reverse light switch a few years ago due to selector yoke wear out. That time I modified the original switch by removing the original pin (which reaches the yoke when selecting reverse) and changed to a longer one...
I have also removed mine when I cleaned and protected the chassis. If it is empty not a big deal to remove it, I also used gearbox trolley to slowly let it down to the floor (but when it is fully empty it is not heavy . I remember also that the...
When i took mine out to weld in a new back end chassis, I tipped it it on it side to away from the filler , the biggest problem I had was removing the hoses on the filler side , breather and the 3rd hose as it has one of thoses clips that need to...