Recent content by baz2328

Hi, Had a similar problem on 2002 disco V8, two things to check, 1) if you have towbar and 2 sockets then check power connection to aux plug, mine was situated above top right hand light cluster and was giving a power drain. 2) there was a 300ma power drain through slabs unit (common problem I...

Still having problems even with new emulators, adaptive learning causing mixture to get to rich. Mick the mechanic has suggested MAF unit - any thoughts? Will disco run on default values without MAF, will mixture be too rich? I have seen on forum that people have said MAF not used when on LPG -...

Cheers Chris, I have been using Mick in at Green Fuels in Hudds to do the work as he is a Prins mechanic - anyway, Disco passed mot today with no probs with emissions and lambdas at 1.01 running on petrol and not lpg. Lpg emulators have been taken out to allow to run on petrol and reset adaptive...

Hi Andy, based in Huddersfield, Yorks. Cheers Baz

Cheers, will have lambdas checked out - it is going for mot on sat, will mot pick up on lambdas - emissions? Baz

Hi all, the disco intermittantly runs rough on gas, it has been in the garage for the last 5 weeks having things tried out, nothing definate found - thoughts are adaptive learning is changing based on one bank of 4 and eventually causing rough running. Idea is to disconnect prinz system and run...

Hi, Have had 3 amigos and checked it to find rhs hub u.s.- replaced hub and reset and all lights off. Now occaisionally, on stopping, get chimes and all 3 lights on again but on turn off-turn on all 3 lights go out but this might happen a couple of times per journey - any ideas? thanks Baz

My disco is 8 years old and is on first compressor, air bags replaced this year as one side had gone, your compressor replacement seems excessive! Baz

Has the original 32mm nut been superceded with a 34mm nut? The reason I ask is that the replacement stake nut with the Brit part front hub is 34mm and the supplier has tried to assure me that this is the correct size. I know my stake nut is original and is a 32mm (because the socket fits!!) any...

Hi, Previous post on this topic (from Weegie) suggested using Loctite 640 on hub to splines (from Rave), have been on net some time looking for a UK supplier (50ml bottle or 6ml tube) without success. Found a supplier in USA but would not ship to UK. Does anyone know of a supplier or an...

Thanks for the quick reply Weegie

Hi, Can anyone tell me the correct grade of loctite to use when replacing hub on splines? Thanks, Baz

Cheers Discool, I will give it a go. Baz

Hi all, recently joined after looking for tech info on the three amigos, that was sorted with a reset prior to the MOT at a cost of £45. Live in Yorkshire have had a 300tdi and currently have a Disco 2 v8 autobiography. Regards, Baz

Hello, is it possible to replace standard LR plug caps with alternative - one cap has come adrift and changing the whole lead is a big job - unless someone knows an easy way? so i was hoping just to fit a new cap in place of broken one. Thanks, Baz