Recent content by bansheeboyo
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
B
Rads , my mistake for not proof reading .
-
B
Hi just wondering is anyone makes hydro steer kits for the 90 ?
Will fixing it onto a standard axle work or wreck the axle ?
I'm just pottering about with it not doing any comps
Any advice greatly appreciated
Scott
-
B
Hi just wondering what people are doing to protect there rags from branches ect
Cheers Scott
-
B
Thanks for the advice boys ,just I seen a twin arb compressor on eBay ans a twin one with tank and got a little panicy
-
B
Hi I'm just wondering what everyone is running to power /air there air diffs .
Will the arb compressor cope with 2 Ashcroft diff lockers running off of it ?
Is there anyone running a air tank and compressor combo ? If so any pictures or info on how to do it ?
Cheers Scott
-
B
Also is there a thread on here that would tell me the settings of the propshaft nuts and bolts 4 of ,thé diff nuts. 5/16 ,thé calipers to mount bolts 12 point about m10 m12
Cheers Scott
-
B
Don't happen to know the torque settings of these bolts above do you lads
-
B
Well it will be for winching and powering the arb compressor
Already have the second alternator fitter 150 amp Ibelive
-
B
hi just wondering what batterys you are all using for your twin battery set up
any pics ?
-
B
thanks guys ,you dont happen to know the bolt size /pitch of the swivel to axle as in picture above /right hand side of pic
cheers scott
-
B
Hi just wondering what the best snorkel is for the 300tdi ?
It would eventually be getting caged so one that works before and after cage would be good .
-
B
Dose anyone know the thread/pitch and size of the bolts that hold the swivel ball seal on ?
Must be about 8 mm or so .
I'm planning on getting stainless ones as the current ones were so rusty I had to use vise grips
Cheers Scott